Search


Rss feeds
Posts Comments Source Code
Rating
Image to SpectrogramNontransitive DicecheaTorrentDomain ColoringiMac G5 CPU Fan view all...
Recent
Pretty GraphHypernova EngineEmergent FeedbackSDL Euclid OrchardSingularity Viewer view all...
Tags

All source code released under the BSD License unless otherwise specified
© 2010, Gavin Black

Speaker Stands

Overview

Some very simplistic speaker stands made with a plunge router, random orbit sander, drill, and hand saw. Nothing really special, and no plans to go into too much detail, but thought I'd post them anyway.

Construction Per Stand

  • Only materials were a handfull of 3.5"x10' pine boards and a dowel rod.
  • Cut two 3.5"x7" pieces, and glued them together for the top, that holds the speaker. They were then glued together to form a 7"x7" square.
  • Cut two 3.5"x30" pieces for the center supports. Did a roundover with the router on each edge on both sides for aesthetics.
  • Cut three 3.5"x10.5" pieces, and glued together to form a 10.5"x10.5" square. Then chamfered the edges with the router.
  • Finished individual pieces:
    The cut boards laid out
  • Drilled pilot holes, and screwed everything together. Made dowel plugs on the top and bottom and sanded everything smooth:
    Speaker stand put together

Conclusion

Well they seem to hold speakers just fine:

Finished stands holding speakers

I've since painted the stands black and the speakers themselves white, but am too lazy to repost pictures :P



Last Edited: 2010-10-23 23:22:01

+ Add a comment